Search results for " Epoxy resin"
showing 10 items of 11 documents
Water diffusion and swelling stresses in ionizing radiation cured epoxy matrices
2017
Abstract In this work a DGEBF epoxy monomer was cured by electron beam radiation in the presence of an iodonium salt and the obtained system was hydrothermally aged as such and also after a thermal treatment, in order to obtain two systems having different uniformity in the cross-linking degree. On both systems, the transient stress field arising from swelling was measured and monitored by an optical Photoelastic technique and the results were commented with reference to a thermally cured epoxy system containing the same monomer and already discussed in a previous work. Beam samples with identical dimensions, obtained from the irradiated systems, have been aged at 80 °C in water, and charac…
Study of the curing of a DGEBA based system through structural investigation
2011
Radiation curing of carbon fibre composites
2014
Epoxy/carbon fibre reinforced composites were produced by means of e-beam irradiation through a pulsed 10 MeV electron beam accelerator. The matrix consisted of a difunctional epoxy monomer (DGEBA) and an initiator of cationic polymerisation, while the reinforcement was a unidirectional high modulus carbon fibre fabric. Dynamic mechanical thermal analysis was carried out in order to determine the cross-linking degree. The analysis pointed out a nonuniformity in the cross-linking degree of the e-beam cured panels, with the formation of clusters at low Tg (glass transition temperature) and clusters at high Tg. An out-of-mould post irradiation thermal treatment on e-beam cured samples provides…
Synthesis od epoxy/carbon fiber composites induced by e-beam. Study of the effect of hydrothermal ageing on thermal and mechanical properties
2010
Nano structured systems synthesised by ionizing radiation
2009
Mode I fracture toughness behavior of hydro-thermally aged carbon fibre reinforced DGEBA-HHPA-PES systems
2012
In this work the Mode I fracture toughness behavior of unidirectional CFRP laminates is investigated by means of Double Cantilever Beam (DCB) tests. The composite samples were manufactured by thermal curing after impregnation of a Carbon fabric with a DGEBA epoxy and anhydride HHPA curing agent. One resin batch was also mixed with a PES thermoplastic monomer to enhance the matrix toughness. Two lots of samples, toughened and un-toughened, were then left to soak in hot water to achieve various degrees of aging. The influence of matrix toughening and hydrothermal aging on the delamination behavior of the composite have then been assessed and correlated with characterization data from Dynamic …
POLYMER ELECTROSPUN NANOFIBERS AS INTERLEAVES FOR ENANCHEMENT OF CFRP LAMINATES DELAMINATION RESISTANCE
2019
Electrospinning process is a technique to produce nanoscale fibers that has evinced more interest in recent years due to its versatility and potential for applications in several applications. The mall size and the concomitant ultra-high specific surface area of electrospun nanofibers make them suitable for several applications, such as tissue engineering, biosensors, filtration and advanced polymer composites (1). In particular for carbon fiber reinforced polymers (CFRPs) the huge specific surface area of electrospun nanofibers results in very large interfacial area between nanofibers and polymer matrix and therefore leads to substantial improvement of fiber-matrix interfacial interactions…
Synthesis, structural, and thermal characterization of a new binuclear copper(II) chelate complex bearing an amine-hardener for epoxy resins
2016
A new di(μ-carbonato)bis[aqua(diethylenetriamine)copper(II)] hexahydrate complex, [{Cu(NH(C2H4NH2)2)(H2O)(μ-CO3)}2]⋅6H2O (1), was synthesized by direct interaction of malachite with diethylenetriamine (dien). The crystals of 1 were characterized by X-ray powder diffraction and IR spectra, as well as structurally characterized. Compound 1 consists of [{Cu(dien)(H2O)(μ-CO3)}2] discrete units whose CO32– anions play the role of bridging ligands combining two Cu(II) chelate cores into a centrosymmetric dimer. The elongated octahedral environment of Cu2+ consists of three nitrogens of dien and an oxygen from CO32– at the base of the bipyramid; the two apical positions of such polyhedron are occu…
Evaluation of the temperature effect on the fractional linear viscoelastic model for an epoxy resin
2016
The paper deals with the evolution of the parameters of a fractional model for different values of temperature. An experimental campaign has been performed on epoxy resin at different levels of temperature. It is shown that epoxy resin is very sensitive to the temperature.